Hello
Sadoun and other members. Received you slave kit today. Hooked it up. I have a big dish with both c/ku bands. I was able to get the ku-band to work as per your instructions, but the
c-band would not work. I will spend more time on this tomorrow, but my question is: on setting ANTENNA 1 FOR C-BAND: Is the 22Khz Tone: off correct? I dont have a clear understanding as to why both ANTENNA 1 and ANTENNA 2 are set for OFF on the 22Khz Tone. Please steer me in the correct understanding on what this does. If I'm right it is actually an intelligent signal switch that tells the DISEQ to switch or select A input or B input. I also set the LO to 5150 for C-band. I assume this is correct also. The instructions I follwed are from you post
Thu Apr 24, 2003 9:02a.m.
Thanks. Also note that I have a seperate
Actuator on the big dish to switch from Horizontal/Vertical in the horn.
Art