Quote:
Originally Posted by Bill_MacClarence
I have a Sadoun 4 x 1 switch. I have three dishes looking at circular birds and a fourth looking at linear birds. The switch works fine with the three circular birds, but when I try to tie the linear one in @ position 4, I get no signal. I have to bypass the switch in order for it to work. I set the DiSEqC switch to "4" so I know it's not a software problem. |
While I agree that it's likely that you have one dead port (I have 3 of those 4x1 switches, and none of them work right), you might try to experiment and switch the position of 2 of your coaxes, ie put the linear on 3 and one of the circular on 4, for example. Ie it might be something to do with the linear coax drawing more current or something, particularly if you have a motor on the linear, and the switch is on the receiver side of the motor by chance.