I just got a new SonicView SV-1000 and also a new dish 1 meter
Fortec with the
INVACOM QPH-031 LNBF ** linear + circular.
--
So I removed the old dish and installed the new
Stab-120 motor and aligned to the south.
I installed the 1 meter dish and put the cable from the SV-1000 to the reciever input on the motor and the other one I ran straight to the L on one port on the lnbf.
I went in and tried to move it with the remote and it looked like nothing was happening. I went out there and it was moving bacl an forth 5 degress off of zero and that is it.
What don't undersatnd here, the Stab 120 will work in NA correct, what I read in the manual the settings are just for London. It says some thing about mach limites and electronic limites.
Hopefully this will work what I purchased here.
Any help here???
Richard