Hello guys
I'm trying to setup 2 motorized dish systems @ two differant locations. Both have similar equipment and I am getting same results (notta)
system 1---Fortec 90cm with wall mount,satcontrol
SM3D22,std lnb ran to #1 motor port;other port terminated w/cap,Neusat SP6000 (sorry
sadoun)
(coords 92.7W 36.8N) settings;178 deg. southernmost "0"-IA(Tel)6 @93w-motor angle 37,dish angle 40
system 2---Fortec 90cm wall mnt,HH90,Ivacom 031 L/C through 2x1 diplexer other two ports terminated w/caps,Neusat SP6000(sorry again sadoun)
(coords 92.4W 36.5N) settings;175 deg. southernmost "0",-IA(Tel)6 @93w-
motor angle 37,dish angle 40
(I tried Usals go to IA6 & rotated on mast also-No gain signal strength/qual.)
@ both sites I get 27-28 constant receiver signal-whether hooked up or not.
I move dishes on masts-no changes (are plumb) using tp11876 V sr3516.
My hair is turning greyer very fast--any advice? Thanks guys
