|
Not knowing what type of 2x1 switch you are planning on using but I am guessing you will have to designate port 1 in DiSEqC to flow out of the motor in which case how would you switch the second switch inline. If you told it to switch to port 2 wouldn't the motor kill port 1?
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|