Doesn't the HH90 point upward? I will go check. Sadoun's photos show the shaft pointing upward. This is most likely why your dish elevation is off so much. I would almost bet if you flipped the motor your dish elevation would come into line. You will probably get more of the arc also.
Ok other pics show it pointing down.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Last edited by elgemcdlf : 11-05-2006 at 12:29 AM.
|