Quote:
|
Originally Posted by steve12
Hello
I connected two lines to the 322 DISH PRO PLUS reciever, and get a message after checking the switch .
The non Band stacked QUAD on port 1 and 3 is not supported as a diseqc device.
port 1 dp feed 119
port 2 dp single 110
port 3 dp feed 118
Satellite Input 2
lnb status direct connect to a Dp feed
Port 1dp feed 119.
Now What am I doing Wrong?
Thank you!  |
Looks like you have a problem with input 2. Input one looks good. Trace the line going to input 2 and make sure the connector is secured.Connect the input 2 line to different port of the switch and try again. If you get the same result, then I would say you have a bad twin LNB (118,119)