I just factory reset "again". Set my true south (G3c) did a channel scan. using usals. (I have G3C with a lock of 66%).
This is my exact next step.
fortec classic:
Name: I chose to set AMC 4KU
its not set so I go to "Positioner"
Positioner is set on Usals I hit save & exit (my lat & long are set).
it says information please wait while dish moves to amc 4ku... only problem is the dish does not move........
It does this no matter which sat I try to load.
a completed antena set up reads like this uning usals:
scan: press ok
name: amc 4ku
tp freq
lnb type: UNI
LNB Power: 13/18
22khz: auto
positioner: set(v13)
diseqc: off
sat lock: off
scan mode: FTA Only
network Search: OFF
I can go outside and manually find the sat using the e/w button on the motor. I then set the "position" do a channel scan, and everything looks cool, until I go to load the next sat. But it will not come back to that Sat once I leave to go manually go to another sat. The only sat that it seems to ever move to is my true south.
?
am i missing a step?