My delama, is i can't get my 3 receiver( 2 viewsat and 1 Magnum) to works independetly without the channels keep hang up when i swich them.
I have 3 receivers aimed at 3 satellite 121(dual lnb linear), 119(dual lnb legacyl, 91(dual lnb legacy). Using 3 multi switch 3x4 for each lnb then to the 3 Diseqc switches.
I find out that this setup will work fine with sat 119, 91 but once i add or connect the sat 121 , then channel start to hang up on receivers when switching. I try the switch 21 betwene the 3X4 and the Diseqc with no success. I also tried different set up for lnb on the receiver. Any one have this problem. Kepp in mind that the same thing happen with 2 receiver setup too. Please help
