|
Thank you all for your explanations and suggestions. I will see about adjusting the motor elevation, then peaking the signal with elevation adjustment as suggested to see if anything improvement. I am using AMC6 at 79W as a true south satellite. That is I set the true south using compass (adjust for magnetic...) I set to 192. I am in Maryland at lat 39.4 and long 77.4. Then I tell the motor to turn to AMC6 at 79W, adjust the azimuth in small steps while watching the signal on the receiver. By peaking the signal, I assume you mean the signal bar on the receiver or on the sat finder meter? The I tweak the elevation settings after peaking the signal by moving the azimuth. I think this is backward from what you are suggesting.
|