I have a 90cm Fortec Star Dish attached to a GeoSatPro 120 dish motor.
I set the Motor elevation to match my Latitude, which is 38
And I set my Dish elevation according the the user manual, which is 24
The mast is dead on perfect.
I'm having trouble finding my southern most sat, which is G10/123 although I did use a compass to get it as close as possible.
I also have an
Invacom Quad LNB with both Linear and Circular connected.
I can get some of the sats, such as 91 and 148, but I have to set my Dish elevation to 31, and I can't get any of the other sats.
When I set the Dish elevation to the recommended 24 degrees, I get nothing.
Why the discrepency, and how can I resolve this?
Thanks.
Edit: Reading some of the Fortec threads, I see that there is about a 5 degree discrepency with the Fortec dishes, which would explain why I get a couple of sats with the dish at 31 degrees instead of at 24 degrees.
But I still can't get numerous other sats, nor can I hit my southern most sat.
Any suggestions?
Thanks.