I am using the
SM3D22 and the Ivacom Quad Polar LNB with a Viewsat Xtreme STB. The LNB input configuration is #1 Linear #1 Circular #2 Linear #2 Circular for two receivers. I'm only using one receiver. I have the #1 position linear LNB hooked to port 2 on the SM3D22 switch and the #4 position Circular hooked to port 1 on the SM3D22 switch.
The problem: The motor is set up to dial in a 6 degree change when you switch to port 2 to compensate for a second separate LNB. The Ivacom is actually like 2 LNBs in one but they are all packaged into one LNB housing so you should not have to dial in the 6 degrees. The manual for the SM3D22 says you can change this to zero. Can anyone tell me how?
Sorry if I bored you but being a newbie supreme... Well what can I say
Thanks