Quote:
|
Originally Posted by wejones
Like I said above, I'd still try to disable the east/west limits. On mine, this kept the motor from going to certain places, including the zero.
|
How do I do this? The only place I see a place for limits is in the positioner menu on the DiSEqC screen. Here is already says DISABLE. I have looked at the other menus and cannot find anywhere to adjust the limits.
I have a Fortec Star
Classic. I did have my locations reversed. I changed those to the correct values. Now, the motor moves to like 50 something when I select
IA5. When I manually select IA5 I have to move the dish to like +7 on the motor.
I have my motor mounted so the tube extends DOWN and the coax cables are on the bottom too. Do I have the motor upside down? The bend in the tube is up. This is how the picture shows it to be mounted in the motor manual. If I mount it up, then the hole in the tube will also be up.
Thanks!