|
Moving receiver between Legacy and DP LNB/switch
Hope someone can give me a definate answer.
At home, I have Legacy Dishnetwork LNBs and switchs. I bought a new DP301 receiver that will work on Legacy and DishPro LNBs.
I am planning to also use this receiver in my RV using a DishPro LNB.
My question is as follows: Can I just move the receiver from home to RV and run the Check Switch utility to find new switch, ( and then move back to home and run utility again) ? Or will it want to stick with legacy hardware and not allow me to move back and forth?
Thanks,
Camille Stephan
__________________
Camille W Stephan
|