|
Pictureon….I had calibrated the Sathawk because I couldn’t see any info on the display. What I have noticed pointed at 119 is that the calibration level is to low for the PQ in both KL and KR ~ 20 and for the SS was ~ 70.
Is there any level range I should looking for whe I calibrate the meter (not the figure that the meter shows when it's working but the figure that the meter shows when it's been calibrating)?
By the way…I have a DB 7025 which I gave to a friend to set it up (I have tried for three months to receive any FTA channels but I haven’t gotten anything). He has two dishes working whit his Triple Dragon receiver (one pointing at 119 and the other at 110) and he set my DB and he could see FTA channels in both satellites with his dishes at his house (he loaded his channel list on my receiver).
So, when he returned my DB to me I though I was going to be easy to correctly point my dish to 119 or 110 (I’m not sure which one of them is the easiest to point at or which has the strongest signal). That’s why I’m thinking that my new dish (Fortec 1.2 mts) or my new LNB (circular, California brand) are not working properly.
Finally I’m like in the begging, without getting any FTA signal.
|