Quote:
|
Originally Posted by pmb1010
maybe I got the test card on AMC2.
It's not very stable, very weak. it's color bars.
Has white text, looks like a phone number across very bottom?
I had to change the Ku LNBF type in the Ultra, from "universal" (dual freq) to "standard" (single freq). Doesnt matter if i use 10600 or 10750, the result on the analog box is the same. At least it's attempting to get something.
I'd expect the signal to be much stronger on Ku with a 4 footer, as I am getting C band on the Ku input port with a really good picture, albeit unwatchable.
Again, maybe the box has it defined as C band and it's all mixed up with what I'm trying to do. |
It finally dawned on me that you apparently have a universal lnb on the KU side, which I guess is why you can't get the feed that is on there right now. I'm getting it on channel 26, which on my Drake puts it at 12096. It's not quite on center freq, but is within 10 MHz of there.
Well, if you have a universal lnbf, and are in the upper range, then you're using the 10600, which will output 11550-12050. Ie 12050 is the upper range, and I was seeing the feed at 12096 +/- 10 . The AMC2 test card is down on a lower channel, which is why you can see that. The test card is a pretty weak signal for me, for some reason. Not sure if it's behind my pine tree or not.... I'll have to look. But I can barely get it with my big dish, so you're not doing badly compared to me anyway. Too bad you can't get the upper range of G11, because that signal is a pretty strong one.