[elgemcdlf]

Verify you have the lnbf skewed correctly first. Since you are showing a reading we have something just not sure what yet. If you run a blind scan now do any channels pop up? If so what are they. Write down any tp freqs the receiver finds. This will help us to identify the sat you are looking at even if no channels are found.

Once one of us can identify what you are looking at we will be able to guide you in the proper direction to complete your install. As to your question concerning dish elevation you use the markings on the dish itself. You should be set at 40.7 or roughly 40 3/4. DO NOT MOVE THIS SETTING AT THIS TIME! You have some form of signal now we need to identify that before any dish changes are made.