I bought an
SG2100 motor. My first attempt out of the box .....it worked! Can't get the whole arc as it is n a temporary location but I use DiseqC 1.2 I actally prefer it to USALS. With Diseqc you can "nudge" the setting and then save it . With USALS if you are off by just a hair, you don't work. I tried both and Diseqc is much better. I have a Lifetime
Classic NA. I set the elevation on the motor to match my elevation 41. Then the dish angle is 30-declination - 23.6 for me. Pointed to SBS6 11741 6616 , moved the entire assy to peak. The motor finds everything in the arc. I hear stories of so many that just can't get a motorized setup going for anything but between you guys and lots of reading I was able to pull it off the first time THANKS!!!