Quote:
|
Originally Posted by elgemcdlf
If you are hitting in the center and not on the ends your dish elevation is off. Try going up one degree and then lowering the motor elevation one degree. If this makes it worse then simply reverse the process with the dish at 1 degree higher than original start point and motor down 1 degree.
|
I will keep that in mind after I swap out the poles. Might run into the same issue.
__________________
[CENTER][B]"I like to shop or browse at Sadoun's website >>> [/B][URL="http://www.sadoun.com/"][B]www.sadoun.com[/B][/URL][B] "[/B][/CENTER]
|