|
If you are hitting in the center and not on the ends your dish elevation is off. Try going up one degree and then lowering the motor elevation one degree. If this makes it worse then simply reverse the process with the dish at 1 degree higher than original start point and motor down 1 degree.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|