Thread: Stationary G10R w/ 76cm Winegard
View Single Post
  #1 (permalink)  
Old 08-17-2006, 01:31 PM
elgemcdlf's Avatar
elgemcdlf elgemcdlf is offline
Super Pro
Expert
  
Join Date: Dec 2005
Location: Carlisle, IN
Posts: 1,973
Rep Power: 311
elgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to beholdelgemcdlf is a splendid one to behold
Send a message via MSN to elgemcdlf Send a message via Yahoo to elgemcdlf
Stationary G10R w/ 76cm Winegard
Ok I gave my Winegard 76cm dish to my neighbor for a stationary mount on G10R. Those who know this dish know it is elliptical and not round. Sitting on my roof on a motor I was getting 11800 at 66%. Took off the motor and over to his house and now the best I can get is 48% on 11800.

Everything except the coax that ran into the house is the same minus the motor. Except when on the motor the dish rolls when moving outbound from 0. From my location G10R is 36 degrees from 0. Would rolling the dish on it's side make any difference? Not getting the ABC channels at all. 11720 is very weak to the point of no picture.

There may be a possibility I am looking just into the very top of one of his trees which he is cutting down today so this evening I will know what that does. If that is not it does anyone with stationary 76cm Wingard install experience have any suggestions?

TIA
Steve
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
Reply With Quote