[rainman]

for starters point dish at 183 degrees on your compass this is your true south.then set your motor to 42 on lat scale of motor.set your dish scale at 23.5 degrees this is the starting point.now set your receiver to standard lnb 10750 lnb power on. positioner to usuals and move to amc 3 tp freq 11716 sr freq 4859.disconnect switch at this time and run cable from motor to L port on your lnb run another cable from motor to receiver. reference the motor to 0 then using usuals move to amc 3 slowly move dish east and west a 1/16" at a time on the pole remember to aloud 5 seconds for receiver to see the change. mark your bracket and pole so you can return to the starting point. change elevation by a 1/2 degree up or down and try east to west again remember slow movement. continue doing this to you get a signal.