After your motor roams around on its own, what happens if you command it to go to its zero position? I have read that coax lenghts in excess of 100ft will cause the motor to malfunction. If it does go to its zero position, then set it to Diseqc1.2 and step it east or west one step. It it continues to roam, then motor is defective.
My motor is Stab HH90, and I did not have any problem what so ever with its operation. You may want to exchange it for STab motor. They are the one that created USALS standard! ( I think )
__________________
[B]"I like to shop or browse at Sadoun's website >>> [/B][URL="http://www.sadoun.com/"][B]www.sadoun.com[/B][/URL][B] "[/B]
[B]Fortec Classic Lifetime NA, [COLOR=blue]Fortec 90cm dish[/COLOR], [COLOR=red]Fortec Universal Ku LNB[/COLOR], [COLOR=lime]Stab HH90 motor[/COLOR], [COLOR=purple]75ft coax[/COLOR].[/B]
|