After reviewing my install, making sure I am 100% level "Plum" on all sides (using even a bubble level in the center), being able to track right and setting HH @ "0" reference with
aiming at G3C or even I5, I am finding that the HH DOES NOT move "a little", it roams and when I try to move it "steping" in either USALS or DESCq it moves all over the place.
I have compression fittings, new RG6, and a COAX
stripper (not razor knifed)... I get GREAT meter readings but for what it is worth, the HH when used just seemingly wants to "ROAM" or wonders around.
I would like a general feedback from those that have aided my effort and reviewing my techniques or methods could I ask if the HH is defective.. It should not be this hard.
And three different FTA receivers should also indicate that it is not a receiver issue, meter should show it is not a tracking or aiming issue and reception indicates to me that the LNBf is good so the only thing I can figure is the I need to exchange the HH?