Thank you so much for detailed answer!!! You guys are of great help. I will definitely take you advice.
Quote:
|
Originally Posted by wejones
It wasn't clear from your description above whether you were using 1.2 or USALS to go to the 95 satellite, but I think you may have used USALS, then used the regular 1.2 commands to peak it or something.
|
I am not sure about myself either, but I probaaly used 1.2 to select the satellite because I selected satellite first then selected USALS as "Positioner Type".
Quote:
|
Originally Posted by wejones
This refers to which type of LNBF you have, and yours will probably be labeled with the LO freqs. Standard LNBFs usually have 10750 LO freq, Universal usually have 9750 and 10600, but sometimes other pairs. Also there are DBS circular lnbfs that have 11250 LO freqs. Enter the proper type corresponding to what you have on your dish.
|
I don't know about my dish. I brought it from eBay as a new item, but there is no model number on the dish, no tech specifications or manual. Only from the seller's AD in eBay, it says:
Model DS2076
Frequensy Range 10.95 - 12.75 GHz
On the package of LNB, it reads
LO: 10.75 GHz