Quote:
|
Originally Posted by Berling Sizemore
Sure, no problem I'll try it out and report back.
Now I do remember something about setting the mechanical limits that where mentioned in the Manuel of the sg2100. However, when I use the little button under the motor... The sat swings all the way east and all the way west. So far that it touches the wall both directions.
I have pointed at 61.5 before with a standard 18" DTV dish. So I have a feel for where that sat is in relation to my location. I can say that with the button on the bottom it would most definitely swing to and past that sat. My trouble seems to be from the Pansat software not allowing it.
I will check to see if I might of screwed up at some point and put in travel limitation on the Pansat. I remember seeing that although it wasn't on the USALS menu it was on the other Diseqc (correct me if I am wrong) protocol.
|
Did you ever get more travel out of your motor?
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|