Ok, so it took me forever to find the signal but with help from a friend we finally got her after months of on and off tinkering. Anyhow, here is the one million dollar problem. If I go to the "Antenna Setup" screen, and move it to one of my sats I have programmed, I get great signal level/quality. Check another sat, same thing, great level/sig. Now, when I am actually watching the channels and moving to another channel, it looks like it is moving the sat, then when it gets there, No Signal. Now, if I go into the menu, antenna and go to that sat, "example: AMC4" then after a few seconds, the signal is back up to normal. Then I get out of all the menu's and there is the channel back up and viewable. I tried changing cables, putting a sat booster. No go. It's almost like the motor is not moving when I am changing channels, but when you go into the "antenna menu" it will move it. It almost seems like it only happens on the 101 sat. Hope someone can help or have any ideas. I know how to do it, but I set this up for my parents to watch the
Vietnamese channels. By the way, I could only find 2 of them. Anyone know of any other ones on any sats? Thanks in advance!