I am a bit cofused here. Here is my understanding your post:
You are trying to install a dish for your customer, but not get all the T5 channels as expected, right? If so, check out the pre-programed transponders to see if all the active ones are there.
If all are there, then the dish dish needs to be re-peaked.
Michael
Quote:
|
Originally Posted by elhilayla
Hi
I did everything as per the requirement ie I set the LO to the factory default.
By the way I have my own Fortec 786NA at home theru which I get about 193 channels.
The new one I installed to one of my customers which is Fortec Star Lifetime.
I could get only 70.
By the way I made the same settings for me at home to my customer.
Thanks
|