1. Try other transponder on T5 to see if you can get lock. By doing this, you can verify your dish is
aiming at T5.
2. Location is not important as long as you have a clear view to see the sats.
Michael
[quote="arashjan"]
Quote:
|
Originally Posted by dtsexpert
If you get good quality, you should get the channels.
Fortect lnbf is Universal, therefore the LO must be set as:
Low 9750, High 10600
Since you use h-h mount, did you follow Sadoun instruction for setting it up. Besides the T5, what sats you can get lock?
Where are you located? What sat is your truesouth?
Give us more info...:-)
Michael
I had this satelit set on the roof 2 weeks ago and it was working well for a week, then we had a storm (no thunder, plus i have surge protector) and it moved the dish probably so i lost my reception. I had the tech that helped me set it up come back again and he said since we have lots of winds here lets bring it down and attach it to the side of the building on the wall. He then set it up on the wall and adjusted it with his satelite signal meter. I have no idea about the "True South" but I get 91% quality and still can not scan any channels, even after returning the reciever to default factory mode and starting the process over again. Is it possible that I need to return it to the roof? I think since i get 91% quality the lower location should still be ok!!?!? I live in Bridgeport NE. If you have any advice i will be greatfull. |