Quote:
|
Originally Posted by webssd
It now tells the difference between Nimiq 1 (82w) and Nimiq 2 (91w), however it says sat found on dishnet 148, dishnet 61.5, and dishnet 119w while aimed at nimiq 1.
|
Ok, Dish Network uses the same transponder information on these satellites. Only one or two transponsders are different between 110 & 119. Since both the SatHawk or the
Birdog use transponder information and other parameters to identify the satellite, it becomes confusing when the data is the same from several satellites. So in this case, you will have to use the azimuth as another check point to verify the signal.