|
Ok now that we know what read the lnbf is do you know standard or uni? If standard you want to set your receiver to 9750 for low LO and 10750 for high LO unless your receiver only takes one input for LO and if that is the case you set to the higher (10750). If your lnbf is a UNI you set your LO to 9750 and 10600 respectively. If you do not have a UNI setting proprogrammed into the receiver. If you have to put it in manually the UNI uses 22MHZ to switch. You will need to make sure it is on auto or on for the V (I think).
If it doesn't work that way 22Mhz on is for H tp's. The switch is built into the lnbf but requires signal from the receiver.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|