ok, here's my results:
It now tells the difference between Nimiq 1 (82w) and Nimiq 2 (91w), however it says sat found on dishnet 148, dishnet 61.5, and dishnet 119w while aimed at nimiq 1.
In regards to echostar 110 and 119 using my dishpro lnb, I am getting signal but no PQ, hence no sat found on either when using DishPro 110 or DishPro 119. Then tried calibarating, but no PQ available at high or low end of the scale. I also noticed that there is now only KL transponders available on those....isn't KR vertical and the core transponders for Dishpro 110 and 119 thus the reason I am not getting sat found? I had both KR & KL avail in A3.9, not anymore. Some KR's have disappeared from other sats as well.
MY other question is, I have an fta receiver that I can hookup to the dishpro dish and that shows both satellites coming across as "Echostar 110W" or "Echostar 119W" when connecting to clear unencrypted channels. Is the meter looking for "DishPro" in the sat id or is it doing transponder checks ? And yes, I have a DishPro lnb, not legacy.
Thanks,
Tim