Quote:
|
Originally Posted by Reinhold
My ultra controls volume fine also.
I have another problem and don't know how to start a new thread.
I bought the QPH031 LNBF and the SDS41C 4Way DiSEqC switch back in april.I have since replaced the DiSEqC switch three times.It seems the liniar side of the switch seems to blow the switch.Sometimes it is intermittend,right now it seems to be permanent.Replacing the switch every few weeks gets to be expencive.Is ther something else I can use?.
I tried using a splitter in reverse.It works,but I loose some of the signal and with that some stations.Any help will be appreciated.
Reinhold. |
Reinhold are you putting the disqec switch between your motor and lnb or motor and receiver. it's best to put it between motor and lnb. 
__________________
Rainman's Equipment
Undien 4600,DSR 922
Fortec Ultra, Satworks 3618
2 Fortec Mercury II
Fortec Classic NA
8.5' Orbitron polar C Ku dish
8.5' Birdview HH C Ku dish
100cm Fortec dish
90cm Fortec dish
2 DG-240 HH motors
Co Rotor II feed horn
Norsat 8515 C band lnb
Norsat 4506A Ku lnb
BSC-621-2 Lnbf
Invacom QPH-031 Lnbf
Invacom SNH-031 Lnbf
Fortec Fsku-v universal Lnbf
V-Box
I Like To Shop at Sadoun Satellite Sales.www.sadoun.com
|