|
Just for the record USALS is receiver not motor. The motor simply follows the commands issued from the receiver. So if the receiver says move west the motor moves west until the receiver issues the command to stop. Unless your motor actually houses some form of controller that could interpret instructions.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|