Quote:
|
Originally Posted by pmb1010
You want the setting on the sg2100's bracket to be your latitude value, or 40 (not 50...) and leave it there.
When you are searching for the satellites, only move dish elevation, and motor side to side on the pole for ajustments.
Move in very small steps, 1/8" will lose the signal very easily. |
hello again yes my latitude setting is 40, been at it all morning and i cant get anything ? even with a sat finder i get nothing. bad lnb maybe???
again im at W74. 48 N 40.09 motor at 40 lat dish at 23.7 approx. right? linear output for sats 70, 72 .