We've tried hitting the AMC5 sat with no luck. Do we need to be on the AMC5/KU or doesn't it really matter? Also, I guess I need verifications on the hardware settings. And what should I be setting the main screen of the AMC5 on the fortec ultra reciever as far as like... it is in Universal 1 ....
Latitude 40.1N
Longitude 76.3W
Dish Elevation 38.7
Azimuth 180+12 for dev = 192
Is the dish Elevation correct 38.7? Is the Azimuth calculations correct? Also, there is also a setting on the motor. What should that be set to as well? degrees wise. Thanks again for all the help.
Also, if you need, maybe I should go back to the settings I had before where I actually got 90% quality on what I thought was the
IA5 sat. We picked up about 6 workings channels or so. Cannot confirm what sat it was hitting for sure though. Tell me what you need as far as info on the channel and how I would get that info from the Fortec receiver and I will do it. When we get the 90% quality on that sat, as soon as the motor tries to go to any other sat, it loses quality right away.
Thanks!!!