|
You did not read my post carefully. I did not say unplug coax I said unplug receiver. Unplugging the coax will cause problems if the receiver is powered up. Leave the entire system connected and in tact. Turn off the receiver and unplug it for 5 minutes. Plug it back in and power up and check to see what happens.
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|