i agree there no good answers here or anywhere for you if
twinhan software is used. you can search
treads till you are blue.and never
find anything.
best twinhan version to start with is 4.232 disk version works ok also.
what you need to see is green in the signal meter. i'll show you how i got it. if you get at least 40% quality. it is enough. more is always better.
hopefully you have already done 1. in my last post. now 2.
2.(make sure your motor is correctly set at your latitude. ) pick a satellite in the satellite list say
ia5 (T5) for setup one. select usal for
motor control. in lnb one select transponder 21 hit apply. motor should move to that position.if not hit move button or goto...whatever.
if you don't see green move pole,motor,dish all together east and west slowly. if you don't get any thing. play with dish up or down in tiny increments. then move complete setup again east and west.
instructions work for all the good sats. it is even easier if you use a circular lnb first towards the other sats. then switch to ku lnb. Unversal
may be better than standard. i don't know