Okay ive been reading the fourms and stuff and found some people with the same problems but like wejones said they dont give enough info or how to solve the problem, so heres all the goodies
my latitude is
42.709 ,motor latitude is also this
longitude is
-83.412
my dish angel is
38.4
and using my
hh90 motor when set to zero is pointing at about
187 degrees so its pointing to my true south.
my LNBF is the (copied+pasted) by the title iam guessing its Linear
Sadoun KUL1
SINGLE DIGITAL STANDARD Linear KU 0.4 dB LNBF
My advanced Signal Meter:
I Use RealVNC(remote Desktop) and connect to the computer with the PCI card Through my home wireless network using my laptop. This lets me see the Signal and control my motorized dish.Pretty Neat Huh
Ive also tried two diffrent drivers with the TwinHan PCI card, The drivers i got with the Twinhan CD made my signal strengh stay around 40-60% no matter which way i pointed the dish and still no channels, and the other driver i found just made the Signal stay at zero and didnt move at all not even 1% and still no channels.
But Thanks Guys for you help so far. iam going to try the things you suggested and if they work then i will repost how i did it.