1. Make sure you set everthing correctly:
Dish elevation
H-H mount elevation
LO for lnbf
+/- magnetic deviation to the azimuth.
Use an active trasponder for tuning the dish
Michael
Quote:
|
Originally Posted by sahong
Hi I'm living in Seattle WA 98103.
I have 36" dish, Fortec star DVB786v3 receiver, Stab HH100 motor and Fortec Star Universal Sigle LNBF.
My lartitude is 47.6 and longtitude 122.32. For tilt the LNB is 0 becouse is motor.
P is 35.3 azimuth 180 dish elevation 22.9.
I'm can't find any satellites. Anywhere I point to, I get in the range of 50-70% for signals, but nothing for quality. The wierd thing about it is that even if I point it to location opposite of where the satellite is supposed to be, I get the same readig.
I've put the dish on a plumb post and I even took the motor off to see if that made a difference, and nothing.
Any ideas? |