|
What is your LNB? If it is not a circular then the setting you have entered is incorrect. For the record I have had no problem identifying signal from any of the DSS sats. That is with a linear LNB just won't get the channels. Are you certain you have the correct settings for your LNB. That will cause a no signal reading. What happens if you point your dish at a different sat?
Steve
__________________
8.5' Mesh Dish w/ C & Ku lnb's & 24" actuator
8.5' Mesh Dish w/ BSC621-2 fixed install for circular C Band on 40.5
Fortec Star 90cm Dish w/ FSKUv lnbf & DMSISG2100
Motorola DSR922
Fortec Mercury II
Digital Stream HD1150.
|