OK, this is getting interesting.. I removed the
HH100 motor, adjust the dish Elevation to 54.6 using Fortec Universtal LNB and settings. Still same problem.
Removed Fortec LNB, installed my old standard LNB, changed the setting to 10750 frq. Better signal level, played with dish Elevation, at 59 degree Elevation (Not 54.6 that I had calculated)!!!! system locked on %50 quality on T5. Moved the dish around, no help, %50 is the best. I was able to scan all the T5 channels.
Replaced the old LNB with the new Fortec LNB, changed the LNB setting back to "Universtal 1". No signal quality. moved around, nothing.
I wounder if there is something wrong with the dish and LNB, there is a small dent on the side of the dish. PLEASE HELP....