1. The
stab elevation angle should be set set at 30, which is your Lat.
2. Go to install, antenna settings, click at the Lnb type, make sure it is set at:
Low 9750
High 10600.
In my opinion, unless the new software makes a big improvement, fixing bugs, you should update your receiver. Otherwise, you don't have too.
Michael
Quote:
|
Originally Posted by abadani
Thanks for reply,
Yes, I was looking for T5, TP 12152,H,20000 at true south (174). And since I was sent "Fortec Star Universal Single LNBF-FSKUV" I select "Universal 1" dusring selection.
Question:
1) My Lat is 30.4417 North then my elevation for HH100 is 30? or since HH100 is upright 90-30=60?
2) what is LO setup?
Oooooh, one other thing, SW version is 2.11 from May 2003, I tried to download a new SW version 2.17 and TP list from my laptop into receiver but failed to make connect, tried different 9 pin cable same result. |