The answer is NO. But you can slave your PCI card to the Fortec receiver, meaning connect the PCI to the Fortec receiver's signal output. Use the Fortec as a master receiver to control polarities.
Don't forget to turn off the "llnb power" option for your PCI card. If it does not have the "lnb power ON/OFF" option, then use a DC blocker to block the DC from the PCI.
Good luck
Quote:
|
Originally Posted by camrita
I have a Fortec 786V3 receiver and a Fortec 31.5 dish with a single LNB. I want to buy and connect the PCI card VisionPlus DTV. My question is: Can I just split the signal from the dish and send it to both receivers at same time? What part(s) do I need to purchase as well? |