|
OK, you've got the old style LNB with the funny looking curved feedhorns. That's a good thing actually because there is no built-in switch. So just connect either LNB to your receiver, set the LNB as STANDARD (10,750 MHz) and the 22KHZ TONE to OFF. Then move the dish until you get signal from T5 or G3C. You cannot get both satellites from that LNB because the 2 feedhorns are spaced 4 degrees apart, while T5 and G3C are only 2 degrees apart.
kat
__________________
For as much as I like to help out our members I simply do not have time to answer Private Messages or emails asking about setup and other general issues. Please post your questions in the forums and we will try to help you out. Thanks.
|