I have a Ariza 700 with a Digiwave HH 990 motor, Qsat 36" dish, Fortec Universal (linear) LNBF, as well as a old D*rect TV LNB (circular) for D*sh and B*V. I am trying to use both at once. I connect the Receiver to the motor then the motor to the
Diseqc switch (Multistar MSD-41), then to the two separate LNB's which are both attached to the same 36" dish. As soon as I turn on the diseqc and the positioner (motor) on the receiver, the Motor stops moving (will not take any commands from the receiver). What am I doing wrong? #-o
Thanks,
Ras H