Do you have a stand-alone receiver? I would not use a PCI card to align the dish.
If you don't have any other receiver, get a sat meter to align the dish. It seems to me that your dish is not well aligned.
Also, try to double check the LO. Although it is set as "universal", double-check to see the actual LO which should be 10600.
good luck
Quote:
|
Originally Posted by mach1sc
Sadoun Satellite Sales replaced my card and lnbf and still it does not work. is there something i am missing?
i aligned the dish to gallaxey 11 or nimiq1,same location, using my bell express view ird and lnb 92% singnal that is great for my area. i removed bell lnb and replaced it with the universal FortecStar (FSKU-v) that came with the system, hooked coax to the lnb-in connection on vp-1020 card opened s/w and set lnb settings to LNB power =on LnB type= universal and disable on all other settings. hit ok and apply and went to Dish setup
i have up to 80% signal but it is red and says red, scan one satellite never locks on to anything. this is the samething the other card was doing. i think the s/w is bad. i would sure like to see one of these cards work for myself. and see the settings to use for lnb.
|