Sadoun Satellite Sales replaced my card and lnbf and still it does not work. is there something i am missing?
i aligned the dish to gallaxey 11 or nimiq1,same location, using my bell express view ird and lnb 92% singnal that is great for my area. i removed bell lnb and replaced it with the universal FortecStar (FSKU-v) that came with the system, hooked coax to the lnb-in connection on vp-1020 card opened s/w and set lnb settings to LNB power =on LnB type= universal and disable on all other settings. hit ok and apply and went to Dish setup
i have up to 80% signal but it is red and says red, scan one satellite never locks on to anything. this is the samething the other card was doing. i think the s/w is bad. i would sure like to see one of these cards work for myself. and see the settings to use for lnb.