Quote:
|
Originally Posted by Admin
If you have a Fortec Star DVB-786v3
1-Go to Install>>Channel Search
2-Scroll down to TP Data
3-Click OK on it.
4-Scroll to the right until you reach "USER DEFINED"
5-Scroll down and enter new TP information
6-Scroll down to STORE and click OK
7-Search the satellite again by clicking on START.
The new VTV4 channel will be added. |
Dear Admin,
I have 3 Fortec Star DVB-786v3 (3 different houses) but I did not get them to work.
After step 6 above, SIGNAL is only 70% and QUALITY is 0% so I go ahead
and click START to search for channel as Step 7. Then it REBOOT but It does not keep the "USER DEFINED" Tranponder 28 as Step 6. It goes back to the original Transponder 27 so I did a Master RESET and tried all the step above many times but It keeps going back to the original Transponder 27 (SIGNAL is 90% and QUALITY is 89%) and now I can't watch VTV4 anymore. Please help