Quote:
|
Originally Posted by satwatch
Hi Afara,
I just read your emails and I have exactly same problem that you had.
I am trying to lock on Telstar5 and I get 75% signal level and 0% quality all the time. It does not matter where I point the dish. I also received 90cm dish that had slight dent because of bad packaging. I have a same LNBF, but I have Ariza TP1000 receiver. Do you think I am not point to the correct az and el.? I am thinking I have a bad receiver.
satwatch
|
Hi Satwatch:
The ARIZA receivers come with local oscillator frequency set to 10,600 MHz as a factory default. Make sure you change it to 10,750 for the ExpressVu LNB. This is done in "Satellite Edit" / "Telstar 5" / "Setup" from the main menu.
kat
